October 2026 · Dave Lock · 4 min read · Category: Margin
Amazon FBA product design in the UK: what it costs and when it pays
For a UK Amazon seller, engineering your own product usually comes in three steps: a £1,250 + VAT diagnostic over 1–2 weeks, a Design Phase from £6,000 + VAT, and then tooling, which is priced per part. Whether it pays comes down to how much margin you are losing on each unit to other sellers of the same factory product, multiplied by how many units you sell.
What are you actually deciding?
Whether to own the product you sell. On a white-label product the factory owns the design and the tooling, and your listing, reviews and PPC sit on top of a unit it can supply to the next seller as well, so engineering a product for FBA is really the decision to have your own design and your own tooling. That makes it an investment, and it is probably worth judging with investment numbers rather than as a design brief.
What does each stage cost?
The diagnostic is £1,250 + VAT, the Design Phase is from £6,000 + VAT, and tooling is quoted once there is a design to quote.
Our diagnostic is the Edge Sprint, £1,250 + VAT over 1–2 weeks. It breaks down the margin on the product you sell now, reads feasibility and FBA readiness, and ends with one of four outcomes in writing, two of which are “fix your account health first” and “don’t proceed”. Whoever you use for this step, it is worth checking that their report is allowed to say no.
The Design Phase is from £6,000 + VAT and usually takes 3–6 weeks from scope-lock. It produces tooling-ready CAD, a specification a factory can quote against and unit-cost estimates at your volumes, and the specification is portable, so you can take it to any manufacturer. If you would rather we ran production as well, the Manufacture Phase is a separate, opt-in step after that.
Tooling is the figure nobody can give you without a design, because it depends on part count, size, material and how many cavities the mould needs, which is why it is worth getting a rough tooling number before you commit to a Design Phase at all.
When does it pay?
When the margin you are losing per unit, multiplied by your monthly volume, covers the Design Phase and tooling over a payback period you can live with. The loss usually comes from tooling amortisation on a shared product, and sellers doing roughly £20k to £200k a month generally have the volume for the sum to be worth doing. Below that the fixed costs are hard to recover, and we would rather say so in the diagnostic than after a design invoice.
When is staying white-label the right call?
When your listing is still holding its price. If review depth, ranking and good logistics are keeping you ahead, and new sellers on the same product are not pulling your price down yet, an engineered product can probably wait. We also avoid regulated categories, meaning food, supplements, and electronics needing CE or UKCA marking you do not already hold, because there the compliance risk outweighs the engineering. The other situations where we would expect to say not yet are in when not to engineer a custom product.
Can the factory copy a new design?
It can copy what it can see, but to do it the factory has to pay for its own tooling, which is slower and dearer for it than reselling a unit it already makes. How far a design can be protected beyond that is a legal question. We coordinate IP and compliance via partners. We do not provide legal advice.
What if the answer is no?
Then you have spent £1,250 + VAT instead of starting a Design Phase that would not have paid back, and the written report says why, and what would have to change for the answer to be yes.
Edge Sprint
If you want these sums run on your own product, that is the Edge Sprint.
We take three Sprint clients a quarter; we confirm your start date when you book. £1,250 + VAT, invoiced with your start date, paid before work starts.